Toki: Outdoor Roller Blinds Made to Measure in Italy

Free design service

After-Sales Service

Delivery 24 / 48 hours

Reference

Toki made to measure Made-to-measure outdoor roller blind with cable guides

Toki is the made-to-measure outdoor roller blind we make in our own workshop in Italy. It closes off one side of pergolas, porches and balconies, giving you shade and privacy.

Made to measure, manual or motorised: it glides smoothly and stops at any height.
Tens-Flow technology: spring-tensioned cables and a weighted bottom bar; the fabric drops straight and stays taut, even in the wind.
Minimalist design: the bottom bar is concealed in a fabric pocket, and decorative covers hide the technical components.
Cable tensioners fix to the floor or the wall.
Waterproof Purishade® or breathable Braidd5® fabric, in ten colours.

Choose the manual version and you can add a motor later.

Get fabric samples delivered to your door Order your samples here

Customise your blind

Measurements

Width, plate to plate

Height

Fabric width: XX cm

Standard cable length: XX cm

I want longer cables

Fabric and colours

Fabric collection

Fabric colour: none

Operation

What is the difference?

Manual

Raise/lower with a crank rod

Motorised

Raise/lower with remote control

+331,74 $

Control type

What is the difference?

Remote control Operated with the multi-channel remote control. Learn more

+65,08 $

Wi-fi bridge Control from your smartphone, with Alexa and Google Home. Learn more

+169,05 $

Solar panel Powers the motor with solar energy. Learn more

+169,05 $

Anemometer Wind sensor connected to the motor. Learn more

+169,05 $

Product details

Remote control outdoor roller shades

3.0

1 verified review

65,08 $

Features

Remote control for Maanta outdoor roller shades which allows you to control the opening and closing of the shade.

15 channels to control up to 15 motors
Reception distance > 200 meters*
Dimensions 130mm x 44mm x 10.5mm
Long battery life > 2 years

Compatible with 12v Maanta motors, click here.

* The distance may vary depending on the obstacles between the remote and the receiver.

Discover the product

Product details

Wifi Bridge

169,05 $

Features

WifiBridge is an optional accessory that allows you to automate Maanta roller shades.

With this device all motorized outdoor roller shades can be controlled via Amazon Echo and Google Home.
It is also possible to create advanced scenarios through the IFTTT service.

You can finally open or close your blind freely in any preferred position.

The WifiBridge is an optional accessory and compatible with:

* It is possible to connect more than one vertical blind to a single WifiBridge device.

Discover the product

Product details

Solar Panel

169,05 $

Features

Solar panel for outdoor shades, modular accessory that can be added to recharge the motor of the drop awning.

It keeps the integrated battery of the awning motor charged so you don't have to charge it manually.
Small size (55 x 6 x 1 cm) and 1 meter long connection cable.
Wall mounting bracket included.

The panel is compatible with:

In the case of multiple roller shades, a solar panel is required for each motor.

*The full charge of the motor for vertical blinds takes about 2 days

Discover the product

Product details

Anemometer for roller shade

169,05 $

Features

The Maanta roller shade anemometer is an advanced sun and wind sensor that automatically controls the opening and closing of roller shades. With intelligent control that adapts to the rhythm of nature, this wind sensor ensures comfort in all weather conditions. Perfect for Easy Roll, Reef Roll and Easy Clear blinds with Maanta motor, it is easy to install and adapts to any outdoor space.

Wireless anemometer: remote control for intuitive operation
Reliable: automatically raise your blinds in case of strong winds
Installation: simple and straightforward

Compatible with motorised Easy Roll, Reef Roll and Easy Clear

Discover the product

Your custom roller blind

Enter your measurements and select the options you want to get a custom configuration.

Complete the configuration to add to basket

Order now and receive it by

with DHL Express

Free design service

After-Sales Service

Delivery 24 / 48 hours

Product Overview

Tens-Flow Technology

Fabric stays taut even in the wind

When the wind picks up on your terrace, Toki's fabric remains taut thanks to Tens-Flow technology: two side cables, kept under tension by springs, guide it from top to bottom, while the weighted bottom bar keeps it perfectly straight. Toki withstands strong winds without damage. You can stop the roller shade halfway, raise or lower it even while the air is moving: the fabric glides along the cables smoothly and evenly.

Tens-Flow Technology

Fabric stays taut even in the wind

Key Features

Bottom Bar

The fabric always hangs straight

The weighted bottom bar (approx. 1.65 kg per metre) keeps the fabric vertical and sits concealed inside a fabric pocket.

Operation

Glides smoothly and stops wherever you want

The wide slot in the bottom bar allows the fabric to glide without jamming; a self-locking winch or motor stops it at any height.

Temperature

Up to 9 °C cooler

The fabric blocks solar heat from outside while letting light filter through: verandas and living areas stay cool and bright.

Assembly

One piece at a time

The top plate comes in two pieces to make installation easier: fix the bracket, mount the winch and winding shaft, then close with the cover.

Optional

Solar-powered motor

The 12V battery motor recharges via solar panel: motorise the awning without running power cables outdoors.

Anchoring

Floor or wall fixing

The bottom anchor locks the tensioned cable in place and is designed to be fixed either to the floor or to the wall.

Compare fabrics

Purishade®

Waterproof yet breathable polypropylene fabric, resistant to abrasion and traction, with long-lasting colour and certified low environmental impact production.

Material: Polypropylene
Weight: 270 g/m²
Colours: Ivory

Beige

Cloud

White

Graphite

Protection levels (from 0 to 5):

Sun: 5 out of 5
Heat: 4 out of 5
Rain: 5 out of 5
Cold: 2 out of 5
View: 5 out of 5

Download the technical datasheet of Purishade (PDF, opens in a new tab)

Craftsmen of the 21st century

Every Toki takes shape in our workshop in Italy, in Gambellara: we cut the fabric to the measurements you send us, we prepare the winding shaft, the bottom bar and the cables, and in just a few days the roller shade is ready to ship.

For the fabric we use two technical textiles selected by the Maanta Style Centre: Purishade®, waterproof and breathable; Braidd5®, micro-perforated. The differences are explained in the fabric guide.

Craftsmen of the 21st century

What makes the difference

Fabric samples

DIY installation

Alexa and Google compatible

Free design service

All inclusive

From manufacturer to you

Hear what our customers have to say

Get inspired

Toki or Sengia Zip? Two ways to close a side

	Toki	Sengia Zip
Side guidance	Spring-tensioned cables	Zip guide rails
Fabric edges	Guided by the cables	Enclosed in the rails
Fabric	Purishade® or Braidd5®, in ten colours	Purishade® or Braidd5®, in ten colours
Operation	Manual or 12 V motor	Motorised, battery and solar panel included
Versions	Standard manual, standard motorised, made to measure	Standard motorised and made-to-measure motorised
Sizes	- Standard 250 cm high in 12 widths - Made to measure up to 400 × 300 cm	Up to 390 × 300 cm
Where it works best	Pergolas, balconies and sunny windows	Pergolas to be closed on the sides

Everything you need: guides and instructions

Document / Video	Action
Installation, use and maintenance manual - manual
Installation, use and maintenance manual – motorised

Technical datasheet

Type	Outdoor roller shades, with cable guides, made to measure
Available sizes	Width 100-400 cm · Height 100-300 cm · Fabric up to 12 m²
Fabrics available	Waterproof Purishade® or breathable Braidd5®, 10 colours
Side guides	Ø 3 mm steel cables tensioned by springs
Structure	Anodised aluminium and AISI304 stainless steel
Operation	Manual with self-locking winch or 12V solar battery motor, your choice
Installation	Wall or ceiling mounted; lower fixings to the floor or wall
Depth when closed	Approximately 10-12 cm
Packaging	One parcel of approximately 150 cm
Warranty	2 years
Production	Designed and made in Italy in Gambellara, in the Maanta workshop

AISI304 stainless steel plates

Bracket and cover, for wall or ceiling mounting

Ø 75 mm aluminium
roller tube

In joined sections,

delivered in a single package

Technical fabric

Waterproof Purishade® or

breathable Braidd5®, 10 colours

Spring-tensioned cables

Ø 3 mm steel cables keep

the fabric taut at any height

Weighted bottom bar

About 1.65 kg per metre,

hidden in the fabric pocket

Bottom anchor

Locks the cable under tension,

on the floor or wall

Type	Outdoor roller shades, with cable guides, made to measure
Available sizes	Width 100-400 cm · Height 100-300 cm · Fabric up to 12 m²
Shape	Rectangular, square
Fabric width	Approximately 104 mm less than the ordered width, on average 52 mm per side
Fabrics available	Purishade®: solution-dyed polypropylene, 270 g/m², waterproof, breathable (2,500 g/m²/24h), UPF 50+, Oeko-Tex Class 1 Braidd5®: 30% polyester and 70% PVC, 410 g/m², micro-perforated with 5% openness: it filters the light and lets the air through
Purishade® colours	White · Ivory · Beige · Cloud · Graphite
Braidd5® colours	White · Ivory · Graphite · Cloud/White · Grey/Black
Colour retention	Over 85% of the colour for 8-10 years (Purishade® and Braidd5®)
Structure
Roller	Extruded 6060 aluminium, Ø 75 mm, in jointed sections. No cassette: when the shade is rolled up, it remains visible
Bottom bar	6060 T5 aluminium, cylindrical Ø 25 mm, in jointed sections with internal ballast (approximately 1.65 kg/m), slotted into the bottom pocket of the fabric. End cap with Maanta logo
Side guides	One Ø 3 mm steel cable per side, kept under tension by springs on the upper brackets and secured at the bottom in the lower fixing
Supports and plates	AISI304 stainless steel. Two-piece top plate (support and cover). Bottom fixing to floor or wall
Springs	Galvanised spring steel
Finishes	Natural silver anodised aluminium · Brushed stainless steel. Suitable for coastal areas
Power supply
Operation	Manual with self-locking winch or 12V solar battery motor, your choice
Manual operation	1:11 worm-gear winch, self-locking, self-lubricating and sealed · Folding anodised aluminium crank handle, approximately 120-150 cm · Right- or left-hand side, your choice
Motor	12 V tubular motor inside the winding shaft · Torque 13 Nm · Rotation speed 13 rpm, adjustable · Electronic limit switches · IP44, protected against water splashes
Motor charging	Solar panel or battery charger with external jack (accessory)
Cycles per charge	Around 300
Declared motor life	15,000-20,000 cycles
Controls	15-channel remote control · WiFi Bridge for smartphone, Alexa, Google Home and IFTTT · Anemometer for automatic retraction
Packaging and warranty
Installation	Wall or ceiling mounted with universal bracket. Not side-mounted, not in a recess, not inclined. Two fixing points with three anchors each, with no intermediate brackets
Depth when closed	Approximately 10-12 cm from the mounting surface, brackets included
Weight	Approximately 8-12 kg in the 240 × 220 cm size
Packaging	One parcel of approximately 150 cm
Package contents	Delivered disassembled. Bracket kit (support bracket and cover bracket) · Idle side kit (pin and bracket for winding shaft, O-ring, split pin, screws) · Fabric tensioning kit (upper cable clamp, spring holder, springs, cable locking cylinders, anchoring washers, cutter) · Bottom bar end caps · Winding shaft, fabric and weighted bottom bar · Side cords. Manual version: winch kit (1:11 winch, winch bracket and cap, screws) and folding operating crank. Motorised version: 12V motor instead of the winch kit.
Not included but required	Wall plugs, to be chosen according to the surface
Optional accessories	12V motor · Motor kit + remote control + solar panel · Motor kit + remote control + battery charger · Solar panel · Battery charger · 15-channel remote control · Wi-Fi Bridge · Anemometer · Operating rod
Warranty	2 years
Production	Designed and made in Italy in Gambellara, in the Maanta workshop

Read less -

Read more +

What you receive with custom-made Toki

Roller tube in sections

Ø 75 mm aluminium roller tube, divided into sections joined with connectors, so it fits in a single package.

Fabric and bottom bar

The fabric in the material and colour you chose, plus the weighted bottom bar that slides into the pocket.

Installation kit

AISI304 stainless steel plates, idler end, springs, cable clamps, bottom anchors, cords, cable cutter and screws. Wall plugs are not included.

Depending on the version

1:11 winch with folding crank rod on the manual version; 12 V motor with built-in battery on the motorised version.

DIY installation

Follow the video guide

Need an installer?

We'll help you find a trusted professional in your area, at no extra cost.

FAQ

An outdoor roller blind with the fabric guided by two side cables tensioned by springs. It fits to the wall or ceiling, in a manual version with a crank gear or a motorised 12V version.

Toki is the next step up from Reef Roll. The cables are kept at constant tension by springs, the bottom bar is a weighted cylinder enclosed in the fabric that slides along the cable without catching, the stainless steel bracket works for both wall and ceiling, and the whole blind arrives in a single package.

On porches, pergolas, canopies, balconies, verandas, terraces, windows and French doors, fixed to the wall or ceiling. It can't be fitted sideways, inside a recess or at an angle.

Yes, you can order fabric samples and see the colours and fabrics in person.

The manual version is operated with the crank rod and stops at any height, with no power needed. The motorised version is controlled by remote or smartphone and recharges with the solar panel. You can also start with the manual version and motorise it later.

No, the anodised aluminium roller tube stays visible when the blind is rolled up. When closed, it projects about 10–12 cm from the wall or ceiling, brackets included.

An outdoor roller blind with the fabric guided by two side cables tensioned by springs. It fits to the wall or ceiling, in a manual version with a crank gear or a motorised 12V version.

On porches, pergolas, canopies, balconies, verandas, terraces, windows and French doors, fixed to the wall or ceiling. It can't be fitted sideways, inside a recess or at an angle.

In the configurator, you can enter either the fabric size or the overall size of the blind. If you enter the overall size, keep in mind that the fabric will be about 104 mm narrower, on average 52 mm per side.

Yes, you can order fabric samples and see the colours and fabrics in person.

No, the anodised aluminium roller tube stays visible when the blind is rolled up. When closed, it projects about 10–12 cm from the wall or ceiling, brackets included.

A 3 mm steel cable runs along each side of the fabric. At the top, springs mounted on the brackets keep it under tension; at the bottom, it's locked into the bottom fixing, attached to the floor or wall: the fabric stays guided and taut all the way up and down.

Guided by the tensioned cables and weighted by the bottom bar, the fabric stays taut and doesn't flap, even when you stop it halfway. In strong wind, though, it should be rolled up: on the motorised version, the anemometer does this automatically when the wind exceeds the threshold.

Weighing about 1.65 kg per metre, it keeps the fabric vertical at all times. It's a 25 mm aluminium cylinder enclosed in a fabric pocket, so you can't see it, and it slides along the cable through a wide eyelet.

Purishade® is a solution-dyed, waterproof polypropylene: choose it if you also want to keep the space dry from rain. Braidd5® is a high-tenacity, micro-perforated technical fabric: it lets some air and water through, so the space behind it stays better ventilated in summer. Purishade® blocks over 98% of UV rays.

With the 15-channel remote, which controls up to fifteen blinds, or from your smartphone with the WiFi Bridge, compatible with Alexa, Google Home and IFTTT. With the anemometer, the blind rolls itself up when the wind exceeds the threshold.

Both, with the same universal AISI304 stainless steel bracket: no special kits needed.

To make fitting easier: you fix the bracket to the wall or ceiling through the slots, mount the crank gear or motor, roller tube and springs, and finish by closing it with the cover, secured with countersunk screws.

The assembly hardware is in the box. Wall plugs aren't included, for either the top plates or the bottom fixings: choose ones suited to the surface you're fixing the blind to, whether wall, ceiling or floor.

Yes, the blind is designed for DIY fitting with the included instructions. For larger widths, it's best to have two people to lift and position the roller tube.

Yes. The 12V motor replaces the crank gear, so the two aren't fitted together. Each blind needs its own motor and its own solar panel.

With the solar panel, which keeps the battery charged, or with the external jack charger. On a full charge, the blind runs about 200 open-and-close cycles.

Both, with the same universal AISI304 stainless steel bracket: no special kits needed.

To make fitting easier: you fix the bracket to the wall or ceiling through the slots, mount the crank gear, roller tube and springs, and finish by closing it with the cover, secured with countersunk screws.

Yes, the blind is designed for DIY fitting with the included instructions. For larger widths, it's best to have two people to lift and position the roller tube.

Yes. The 12V motor replaces the crank gear, so the two aren't fitted together. Each blind needs its own motor and its own solar panel.

With the solar panel, which keeps the battery charged, or with the external jack charger. On a full charge, the blind runs about 200 open-and-close cycles.

Two years of legal guarantee, handled directly by Maanta.

Manufacturing defects, material flaws and mechanical malfunctions.

Roll up the blind: wind damage beyond the operating limits isn't covered by the guarantee. On the motorised version, the anemometer rolls it up automatically.

Report the damage to customer service with your order number and a few photos: we'll take care of the replacement.

Two years of legal guarantee, handled directly by Maanta.

Manufacturing defects, material flaws and mechanical malfunctions.

Roll up the blind: wind damage beyond the operating limits isn't covered by the guarantee. On the motorised version, the anemometer rolls it up automatically.

Report the damage to customer service with your order number and a few photos: we'll take care of the replacement.

Inspiration space

Share your Maanta moments with #mymaanta

Questions and answers

Do you have doubts or questions about this item?

Feel free to ask!

Your questions will also help other users.

Ask a question

Alternatively, contact our customer service who will guide you with personalised advice.

21st-century artisans

Where Italian tradition meets
modern innovation

Expert hands guide intelligent machines.
Time-honoured knowledge meets cutting-edge technology. At Maanta,
craftsmanship hasn't stopped at the past: it has evolved
to create products that stand the test of time and improve everyday life.

Discover how we work

Toki made to measure Made-to-measure outdoor roller blind with cable guides

Customise your blind

Measurements

Fabric and colours

Operation

Manual

Motorised

Control type

Remote control outdoor roller shades

3.0

Features

Wifi Bridge

Features

Solar Panel

Features

Anemometer for roller shade

Features

Your custom roller blind

Product Overview

Fabric stays taut even in the wind

Fabric stays taut even in the wind

Key Features

The fabric always hangs straight

Glides smoothly and stops wherever you want

Up to 9 °C cooler

One piece at a time

Solar-powered motor

Floor or wall fixing

Compare fabrics

Purishade®

Braidd5®

Craftsmen of the 21st century

Craftsmen of the 21st century

What makes the difference

Hear what our customers have to say

Get inspired

Toki or Sengia Zip? Two ways to close a side

Everything you need: guides and instructions

Technical datasheet

AISI304 stainless steel plates

Ø 75 mm aluminium roller tube

Technical fabric

Spring-tensioned cables

Weighted bottom bar

Bottom anchor

What you receive with custom-made Toki

Roller tube in sections

Fabric and bottom bar

Installation kit

Depending on the version

DIY installation

Follow the video guide

Need an installer?

FAQ

FAQ

What is Toki?

What's the difference between Toki and Reef Roll?

Where can I fit it?

Can I see the fabrics before I order?

Manual or motorised?

Does it have a cassette?

What is Toki?

What's the difference between Toki and Reef Roll?

Where can I fit it?

How do I measure?

Can I see the fabrics before I order?

Manual or motorised?

Does it have a cassette?

How do the spring-tensioned cables work?

How does it handle wind?

What does the weighted bottom bar do?

What's the difference between Purishade® and Braidd5®?

How is the motorised version controlled?

How do the spring-tensioned cables work?

How does it handle wind?

What does the weighted bottom bar do?

What's the difference between Purishade® and Braidd5®?

How is the motorised version controlled?

Can it be fitted to the wall or the ceiling?

Why is the top plate in two parts?

Ø 75 mm aluminium
roller tube

Where Italian tradition meets
modern innovation