Which finish is better – galvanised or stainless steel?

It depends on where you're installing. Galvanised finish works well for most outdoor installations; AISI 304 stainless steel offers higher corrosion resistance and is the better choice where there's greater moisture or prolonged exposure – ideal for British gardens and terraces where damp conditions are common.

What are these bars used for?

They are used to fix the wall plates of Maanta shade sails to the wall – the point where the sail transfers its tension.

Which wall plates are they compatible with?

Compatible with all Maanta wall plates designed for anchoring shade sails.

Can I use them to fix poles?

No: for pole bases and wall collars, you need the larger M10 bar, the M12 x 13 cm. These M10 bars are designed specifically for wall plates.

How many bars do I need?

The set contains 4 bars: use one for each fixing hole in the plate. For more plates, simply add extra sets.

What is the difference between galvanised and AISI 304 stainless steel?

Galvanised steel protects against corrosion through a zinc coating; AISI 304 stainless steel resists thanks to its alloy composition and performs better in conditions of high humidity and intense exposure. The choice comes down to long-term outdoor performance, not size – which is identical in both cases.

Is AISI 304 stainless steel suitable for use near the sea?

It offers higher corrosion resistance than galvanised steel, but AISI 304 is not a marine-grade stainless steel like AISI 316. In highly saline environments, it can hold up well with periodic checks and an occasional rinse with fresh water — ideal for many British coastal gardens when properly maintained.

What size and thread do they have?

Diameter M10, length 12 cm (120 mm), standard right-hand thread: they use common M10 nuts and washers.

What is the holding strength of the anchor?

The holding strength depends mainly on the injection mortar used and the type of substrate. The stainless steel bars have a minimum breaking load of 600 N/mm².

How are they installed?

Drill into the wall, blow away the dust, inject the injection mortar and insert the bar by rotating it, leaving enough protruding for the plate. Allow to dry, then place the plate and secure with a washer and nut.

What surfaces are they compatible with?

Solid masonry and concrete. For hollow or friable substrates, such as perforated bricks, use a mesh sleeve with injection mortar.

Is injection mortar absolutely necessary?

Yes, we recommend it: it's the injection mortar that gives the bar a full, lasting grip in the wall, where the shade sail pulls continuously.

How do I maintain them over time?

Occasionally check the tightening of nuts and washers. For the stainless steel version used in damp areas or near the sea, a rinse with fresh water removes salt deposits and extends their lifespan.

What warranty do they come with?

Two years. They are sold directly by Maanta, with the warranty managed by us.

A part is missing or I received a defective one: what should I do?

Get in touch with us: Maanta's support team will get back to you within a few working days and find a solution with a confirmed date.

Which finish is better – galvanised or stainless steel?

It depends on where you're installing. Galvanised finish works well for most outdoor installations; AISI 304 stainless steel offers higher corrosion resistance and is the better choice where there's greater moisture or prolonged exposure – ideal for British gardens and terraces where damp conditions are common.

What are these bars used for?

They are used to fix the wall plates of Maanta shade sails to the wall – the point where the sail transfers its tension.

Which wall plates are they compatible with?

Compatible with all Maanta wall plates designed for anchoring shade sails.

Can I use them to fix poles?

No: for pole bases and wall collars, you need the larger M10 bar, the M12 x 13 cm. These M10 bars are designed specifically for wall plates.

How many bars do I need?

The set contains 4 bars: use one for each fixing hole in the plate. For more plates, simply add extra sets.

What is the difference between galvanised and AISI 304 stainless steel?

Galvanised steel protects against corrosion through a zinc coating; AISI 304 stainless steel resists thanks to its alloy composition and performs better in conditions of high humidity and intense exposure. The choice comes down to long-term outdoor performance, not size – which is identical in both cases.

Is AISI 304 stainless steel suitable for use near the sea?

It offers higher corrosion resistance than galvanised steel, but AISI 304 is not a marine-grade stainless steel like AISI 316. In highly saline environments, it can hold up well with periodic checks and an occasional rinse with fresh water — ideal for many British coastal gardens when properly maintained.

What size and thread do they have?

Diameter M10, length 12 cm (120 mm), standard right-hand thread: they use common M10 nuts and washers.

What is the holding strength of the anchor?

The holding strength depends mainly on the injection mortar used and the type of substrate. The stainless steel bars have a minimum breaking load of 600 N/mm².

How are they installed?

Drill into the wall, blow away the dust, inject the injection mortar and insert the bar by rotating it, leaving enough protruding for the plate. Allow to dry, then place the plate and secure with a washer and nut.

What surfaces are they compatible with?

Solid masonry and concrete. For hollow or friable substrates, such as perforated bricks, use a mesh sleeve with injection mortar.

Is injection mortar absolutely necessary?

Yes, we recommend it: it's the injection mortar that gives the bar a full, lasting grip in the wall, where the shade sail pulls continuously.

How do I maintain them over time?

Occasionally check the tightening of nuts and washers. For the stainless steel version used in damp areas or near the sea, a rinse with fresh water removes salt deposits and extends their lifespan.

What warranty do they come with?

Two years. They are sold directly by Maanta, with the warranty managed by us.

A part is missing or I received a defective one: what should I do?

Get in touch with us: Maanta's support team will get back to you within a few working days and find a solution with a confirmed date.

Set of 4 threaded rods made of galvanized steel M10 length 12 cm

Free design service

After-Sales Service

Delivery 24 / 48 hours

Reference

Threaded rods for wall plates M10x12 Set of 4 pcs in galvanised steel or stainless steel

4.0

2 verified reviews

Fixing a shade sail to the wall means entrusting a few centimetres of masonry with all the force the wind puts on it.
The M10 threaded rods secure the wall plate: they anchor deep with injection mortar and hold their grip while the sail works above you. Choose them in galvanised steel for most British gardens and terraces, or in stainless steel, which fears neither rust nor salt air, where humidity and exposure run higher.

Complete set: 4 M10 threaded rods, 4 washers and 4 nuts
Galvanised steel or AISI 304 stainless steel: two finishes to choose from
Size M10 x 12 cm, for the wall plates of Maanta shade sails
Full hold with M-Plus injection mortar in the masonry

If you're looking for the threaded rods for poles, click here

Choose options

Material: Galvanized Steel

Galvanized Steel
Stainless Steel

Total price

$46.00

VAT included

This product is no longer in stock with those attributes.
But is available with others.

I agree to the terms and conditions and privacy policy (GDPR) - Privacy Notice

Order now and receive it by

with DHL Express

Free design service

After-Sales Service

Delivery 24 / 48 hours

The threaded rods made of galvanized steel M10 have a length of 12 cm and are ideal for fixing our wall plates .

This complete set consists of:

     4 threaded rods M10 with 12 cm length
     4 washers
     4 screw nuts

Our video tutorials illustrate the use of the threaded rods very well!

Inspiration space

Share your Maanta moments with #mymaanta

Customer Reviews

4.0

Based on 2 reviews

Read a summary

All Maanta reviews

Translate all

thomas c. FR 12/08/2026

Verified review

basic quality

not the best quality Read more Read less

Translate

12/08/2026

Was this review helpful?

thomas c. FR 12/08/2026

Verified review

basic quality

not the best quality Read more Read less

Translate

12/08/2026

Was this review helpful?

Questions and answers

Do you have doubts or questions about this item?

Feel free to ask!

Your questions will also help other users.

Ask a question

Alternatively, contact our customer service who will guide you with personalised advice.

21st-century artisans

Where Italian tradition meets
modern innovation

Expert hands guide intelligent machines.
Time-honoured knowledge meets cutting-edge technology. At Maanta,
craftsmanship hasn't stopped at the past: it has evolved
to create products that stand the test of time and improve everyday life.

Discover how we work

Threaded rods for wall plates M10x12 Set of 4 pcs in galvanised steel or stainless steel

4.0

Inspiration space

Customer Reviews

4.0

basic quality

basic quality

basic quality

basic quality

Questions and answers

21st-century artisans

Where Italian tradition meets
modern innovation

Help & Support

About us

Services & Guarantees

Threaded rods for wall plates M10x12 Set of 4 pcs in galvanised steel or stainless steel

4.0

4.5

5.0

4.9

4.8

Inspiration space

Customer Reviews

4.0

Customers say

basic quality

basic quality

basic quality

basic quality

Ask a question

Questions and answers

21st-century artisans

Where Italian tradition meets modern innovation

Where Italian tradition meets
modern innovation