Landa: Stainless Steel Outside Corner Bracket for Shade Sails
Landa: Stainless Steel Outside Corner Bracket for Shade Sails
Landa: Stainless Steel Outside Corner Bracket for Shade Sails
Landa: Stainless Steel Outside Corner Bracket for Shade Sails
Landa: Stainless Steel Outside Corner Bracket for Shade Sails
Landa: Stainless Steel Outside Corner Bracket for Shade Sails
Landa: Stainless Steel Outside Corner Bracket for Shade Sails
Landa: Stainless Steel Outside Corner Bracket for Shade Sails
Landa: Stainless Steel Outside Corner Bracket for Shade Sails
Landa: Stainless Steel Outside Corner Bracket for Shade Sails
Landa: Stainless Steel Outside Corner Bracket for Shade Sails
Landa: Stainless Steel Outside Corner Bracket for Shade Sails
Landa: Stainless Steel Outside Corner Bracket for Shade Sails
Landa: Stainless Steel Outside Corner Bracket for Shade Sails

Free design service

After-Sales Service

Delivery 24 / 48 hours

Reference

Landa Outside Corner Bracket for Shade Sails

Landa is the outside corner bracket that turns the corner of the house into an anchor point for your shade sail. The L-shape spreads the pull across two sides of the wall, and the welded tab holds it in the direction the sail pulls. You mount it on concrete or solid masonry, and the sail stays taut all season.

  • 8 mm attachment tab: welded at 45° in the direction the sail pulls.
  • AISI 304 stainless steel: stays outside all year, even near the sea.
  • Slot-guided mounting: the bracket slides onto the bars already set in the wall.
  • Compatible with turnbuckles and the Muscle x3 kit from the Maanta range.

Choose options

Version: Wall Angle Plate
  Wall Angle Plate
  Wall Angle Plate + 4 Stainless Steel Threaded Rods

Total price

£ 110.03
VAT included
truck
truck
Order now and receive it by 
with DHL Express

Free design service

After-Sales Service

Delivery 24 / 48 hours

Product Overview

A name borrowed from sailing ships

On sailing ships, the chainplate is the steel plate that connects the shrouds — the cables that hold the mast upright — to the hull: small in proportion to the load it bears, it works in silence through every tack. This bracket takes its name from that component because it does the same job on your home: it holds the shade sail at the corner of the wall, with the tension absorbed by the steel.

A name borrowed from sailing ships

On sailing ships, the chainplate is the steel plate that connects the shrouds — the cables that hold the mast upright — to the hull: small in proportion to the load it bears, it works in silence through every tack. This bracket takes its name from that component because it does the same job on your home: it holds the shade sail at the corner of the wall, with the tension absorbed by the steel.

Key Features

Welded tab, aligned with the load direction
Attachment

Welded tab, aligned with the load direction

The 8 mm tab is welded at 45° on the corner, in the direction the shade sail pulls: the load works in the direction where the steel is strongest.

Load distributed across two sides
Structure

Load distributed across two sides

The 90° shape wraps around the corner and distributes the tension across two sides of the wall, rather than just one as a flat plate would.

Open slots, easier installation
Installation

Open slots, easier installation

Two holes and two U-shaped slots with a 70 mm centre-to-centre spacing: the bracket slides onto pre-set bars without millimetre-precise alignment.

Stainless steel, no rust
Durability

Stainless steel, no rust

AISI 304 steel withstands rain, sun and salt air without rusting, even in coastal environments. Polished and brushed finish.

Rounded corners, no sharp edges
Finish

Rounded corners, no sharp edges

Rounded corners with a 10 mm radius protect hands and ropes. A detail you notice every time you adjust the shade sail.

Compatible with Maanta fixings
System

Compatible with Maanta fixings

The carabiner's included: hook on turnbuckles and the Muscle kit to tension the shade sail, the same hardware as Maanta's wall plates.

Get inspired

Everything you need: guides and instructions

Document / Video Action

Technical specifications

Product type

90° corner bracket for external corner

Material

AISI 304 stainless steel (rust-proof, suitable for permanent outdoor exposure)

Finish

Polished and brushed, natural steel

Plate thickness

6 mm

Attachment tab

8 mm, welded at 45° along the corner bisector

Total height

170 mm

Fixing holes

2 holes Ø 14 mm + 2 open U-slots · 70 mm centre distance

Tensile strength

≥ 515 N/mm²

Recommended fixing

Injection mortar and threaded bars, not common screws and plugs

Compatible walls

Concrete and solid masonry · not suitable for walls with thermal cladding (the insulating coating cannot withstand the tension of a shade sail)

Shade sail compatibility

All Maanta shade sails

Not compatible with wall profile (Lean) shade sails

Packaging and warranty


Packaging

Approximately 18 × 18 cm

Available versions

Corner wall bracket

Corner wall bracket + 4 stainless steel threaded bars

Package contents

Basic version: 1 corner bracket + 1 quick release carabiner

Version with bars: 1 corner bracket + 1 quick release carabiner + 4 stainless steel threaded bars

Weight

2.25 kg

Warranty

2 years

Read less -

Read more +

What you get with Landa

FAQ

FAQ

To create an anchor point for the shade sail on the outer edge of your home, where there is no flat wall to use and no space for a pole.

When the corner of the building is the strongest and closest point to the shade sail: the L-shaped bracket distributes the pull across two sides of the wall instead of just one.

No. Landa is a fixing accessory: the shade sail is purchased separately.

It is compatible with all the shade sails in our catalogue. It is not compatible with wall-profile shade sails (Lean).

The basic version includes just the bracket with a quick-release carabiner; the other adds 4 stainless steel threaded rods for fixing.

One for each corner of the shade sail that you want to attach to an edge. The other corners are fixed with wall plates or poles.

AISI 304 stainless steel: it stays outdoors all year round without rusting.

It is the designation for a stainless steel grade suitable for permanent outdoor exposure, including in coastal areas.

The plate is 6 mm thick; the hooking bracket is even thicker, at 8 mm.

Because that's the direction the shade sail pulls: the load works within the plane of the steel, never across the weld.

They let you slide the bracket onto bars that are already fixed in the wall – no need to align four blind holes to the millimetre.

Natural steel, polished and brushed.

Yes, it is suitable for saline and coastal environments too.

The final holding capacity depends on the wall and the injection mortar used. The steel has a tensile strength of at least 515 N/mm²; for more demanding projects, get in touch with our free design service.

Using injection mortar and threaded rods, on concrete or solid masonry.

No. The tension of a shade sail requires injection mortar fixings: this is the only way to achieve the holding strength designed for the most demanding sail fabrics.

No: external wall insulation is a thermal panel and does not provide sufficient grip for the tension of a shade sail. A solid masonry wall or concrete surface is required.

In the dedicated version, yes: 4 stainless steel threaded rods, already included in the pack.

It depends on the angle you want to give your shade sail. Our free design service will help you determine the ideal fixing points and heights.

Two years from the date of purchase.

Material and workmanship defects, including welding.

If it hasn't been dispatched yet, in most cases yes: contact our customer service team right away.

Our free design service is here to help: we'll guide you through the best fixing points and accessories for your shade sail.

Inspiration space

Share your Maanta moments with #mymaanta

Questions and answers

Do you have doubts or questions about this item?

Feel free to ask!

Your questions will also help other users.

Ask a question

Alternatively, contact our customer service who will guide you with personalised advice.

21st-century artisans

Where Italian tradition meets
modern innovation

Expert hands guide intelligent machines.
Time-honoured knowledge meets cutting-edge technology. At Maanta,
craftsmanship hasn't stopped at the past: it has evolved
to create products that stand the test of time and improve everyday life.

Discover how we work
Maanta - Artigiani del XXI secolo